Login to view prices
| Weight | 85 kg |
|---|---|
| Type of blower | Tri lobe blowers |
| Type of cooling | Air |
| Flow rate | 24–131 |
| Pressure | 0.1–0.7 |
| Brand | TMVT |
| Model no | 3MTL – 045 |
| Duty | Continues |
| Type of drive | V Belt Drive |
| Type of impeller | Lobe Type |
| Direction of Rotation | Clockwise |
| Performance Test Code | BS 1571 Part II |
| Operating speed of blower | 1250-2250 |
| Power - BKW (Blower + PRV) | |
| Gd2 Value | 0.046 |
| Discharge line / Opening | 45 |
| Efficiency - Volumetric | AS PER PARAMETERS |
| Efficiency - Mechanical | AS PER PARAMETERS |
| Type of orientation flow | L Type |
| Noise level | |
| Vibration level | <8MM/SEC. |
| Filter efficiency | 0.95 |
| Blower discharge temp | |
| Painting specs for blower | |
| Inspection & Testing | BS 1571 PART-II |
| Motor - RPM | 1450-1500 |
| MOC of casing & side plates | C.I. IS 210, FG 260 |
| MOC of lobes | SG Iron 400/15 |
| Type of seal | Labyrinth seal |
| MOC of shaft | SG Iron 400/15 |
| MOC of shaft sleeve | NA |
| MOC of coupling pulley | C.I. |
| Pulley - Diameter range | As per selection |
| Bearing - Type | DEEP GROOVE BALL BEARING |
| Bearing number | 6206Z |
| Bearing - Life | L10 |
| Base frame - MOC | M.S. IS 2062 |
| Gears end - Lubrication | OIL Viscosity Grade-320 |
| Lubrication specification | DE-GREASE(Balmerol & Grade – AP3 or Equivalent)& NDE OIL (GR.320) |
| Safety Valve - MOC | C.I. |
| Safety Valve - Size | 1” BSP |
| Air filter body - MOC | M.S.IS 2062 |
| Type of suction filter | Grobe Filter |
| Filter hood | MS |
| Base frame - Blower | M.S. |
| Motor slide rails | M.S. |
| V Belt | As per selection |
| V Belt guard | M.S. |
| Drive pulley - Blower | C.I. |
| Interconnecting piping | M.S. |
| Companion flange | M.S. IS 2062 |
| Foundation bolts | MS |
| Silencer with flange | M.S. (SIZE : 45NB) |
| First Fill Lubricant | DE-GREASE & NDE OIL (GR.320) |
| Pressure relief valve (PRV) | C.I body with brass seat |
| Non return valve (NRV) | Gun metal |
| Pre-gauge - isolation valve | 2″ DIAL 1/4″ CONN. MOC. STD |
| Weight | 85 kg |
|---|---|
| Type of blower | Tri lobe blowers |
| Type of cooling | Air |
| Flow rate | 24–131 |
| Pressure | 0.1–0.7 |
| Brand | TMVT |
| Model no | 3MTL – 045 |
| Duty | Continues |
| Type of drive | V Belt Drive |
| Type of impeller | Lobe Type |
| Direction of Rotation | Clockwise |
| Performance Test Code | BS 1571 Part II |
| Operating speed of blower | 1250-2250 |
| Power - BKW (Blower + PRV) | |
| Gd2 Value | 0.046 |
| Discharge line / Opening | 45 |
| Efficiency - Volumetric | AS PER PARAMETERS |
| Efficiency - Mechanical | AS PER PARAMETERS |
| Type of orientation flow | L Type |
| Noise level | |
| Vibration level | <8MM/SEC. |
| Filter efficiency | 0.95 |
| Blower discharge temp | |
| Painting specs for blower | |
| Inspection & Testing | BS 1571 PART-II |
| Motor - RPM | 1450-1500 |
| MOC of casing & side plates | C.I. IS 210, FG 260 |
| MOC of lobes | SG Iron 400/15 |
| Type of seal | Labyrinth seal |
| MOC of shaft | SG Iron 400/15 |
| MOC of shaft sleeve | NA |
| MOC of coupling pulley | C.I. |
| Pulley - Diameter range | As per selection |
| Bearing - Type | DEEP GROOVE BALL BEARING |
| Bearing number | 6206Z |
| Bearing - Life | L10 |
| Base frame - MOC | M.S. IS 2062 |
| Gears end - Lubrication | OIL Viscosity Grade-320 |
| Lubrication specification | DE-GREASE(Balmerol & Grade – AP3 or Equivalent)& NDE OIL (GR.320) |
| Safety Valve - MOC | C.I. |
| Safety Valve - Size | 1” BSP |
| Air filter body - MOC | M.S.IS 2062 |
| Type of suction filter | Grobe Filter |
| Filter hood | MS |
| Base frame - Blower | M.S. |
| Motor slide rails | M.S. |
| V Belt | As per selection |
| V Belt guard | M.S. |
| Drive pulley - Blower | C.I. |
| Interconnecting piping | M.S. |
| Companion flange | M.S. IS 2062 |
| Foundation bolts | MS |
| Silencer with flange | M.S. (SIZE : 45NB) |
| First Fill Lubricant | DE-GREASE & NDE OIL (GR.320) |
| Pressure relief valve (PRV) | C.I body with brass seat |
| Non return valve (NRV) | Gun metal |
| Pre-gauge - isolation valve | 2″ DIAL 1/4″ CONN. MOC. STD |
There are no reviews yet.
Abrasives-Tooling-Cutting
Adhesives-Sealants
Bearings-Transmission Belts
Blowers-Compressors
Cement-Steel
Chemicals-Polymers-Resins
Dyes-Colours-Pigments
Electrical Cables-Wires
Electricals
Electronics-Instrumentation
Fasteners
Laboratory-Hospital Supplies
Lights-Batteries-Solars
Membranes-Filters-Housings
Motors & Pumps
Office Supplies-IT
Oil-Lubricants-Grease
Packaging-Labels-Tapes
Paints-Coatings
Pipes-Tubes-Fittings
Power & Hand Tools
Safety-Security
Valves
Welding-Soldering
Thermal Technologies
Sludge Technologies
Reviews
There are no reviews yet.